Khaled Sharifulla Shuvo

Call: 01718293536--01828522727--01919293536

                  =Welcome_To_Khaled_Sharifulla_Shuvo=

 ""Nokia Mobile Phone Secret Codes"""

* # 7370925538 # (valet code reset) 6230

* # 746025625 # [* # sim0clock #]

* # 92702689 # [* # war0anty #]

* # 7370925538 # (valet code reset) 6230

* # 746025625 # [* # sim0clock #]

* # 92702689 # [* # war0anty #]

To access the service menu of the phone by dialing * 3001 # xxxxx #, where xxxxx - security code (security code), which defaults to 12345. Thus, to enter will need to dial * 3001 # 12345 # In this mode, for example, you can change the name of the network operator is displayed in the standby mode. To do this, select NAM1, scroll to the sub-Alpha Tag, change it at will (for example, write Vovochka and click OK. Exit is off and on the phone.

It is possible that this code works on other phones (51hh, 61hh).

* # 0000 #, birth date and phone version prog.obespecheniya

* # 06 #, on many phones imei

* # 92702689 #, then a * bnutoe menu, I do not know why

* # 3370 # and * # 3370 *- on and off the quality of communication, like that, but not all the operators of this crap is supported. Near the Nokia had patched v 5.79

service code NOKIA 5120&5125:

Besides from the above there are still a couple SERVICE CODE

1) * # 639 # (* # NEW #) is used to add numbers ie you can register multiple phone numbers, and switch between them.

2) * # 92772689 # (* # WARRANTY #)

1) The serial number

2) release date

3) The date of the reprogramming

4) The date of last repair.

5) Includes data

6) The total talk time.

3) * # 837 # or * # VER # version of the phone (not supported on all models)

4) * # 9999 # or * # 6120 # version softa (not available on all models)

before you change something in the settings

To think well, if you can BACK THEN ALL OF PLACE

Particularly in paragraph 1

Change the name of the operator can not at all NOKIA models in the latest models, this feature is disabled by the manufacturer.

the only (almost), plus the service code * # 3001 # 12345 # This is an opportunity to recover forgotten passwords to activate the mobile.

And another plus - see the level of the received signal.

NOKIA 2110

Show EMEI number * # 06 #>

Show phone software version * # 9999 #> or 2110i * # 170602112302 #> or * # 682371158412125 #>

See the date of manufacture phone * # 3283 #>

3110

Show EMEI number * # 06 #>

Shows software version * # 3110 #>

Restores factory settings * # 7780 *>

The entrance to the special menu * # 92702689 #> Commands in a special menu:

6232 OK indicates the month and year

7332 OK indicates the last modification date in the program

7832 OK indicates the date of purchase (if entered)

37832 OK you can enter the date of sale MMYY ('re careful then you can not change)

9268 OK indicates the serial number (IMEI)

5110

To reduce electricity consumption can disable EFR (Enhanced Full Rate) # 3370 #>

To activate EFR * 3370 #>

To reduce the rate of battery discharge, and enable HR (Half Rate) * 4720 #> then turn off and back on the phone.

To enable HR # 4720 #>

To disable the SP-encoding (provided that the PIN-code enabled device): When you request a PIN-code, press "C", then - the up arrow or down arrow. Click the "C" until the display clears. Then enter the command change PIN-code, but do not change it in fact - ** 04 * PIN * PIN * PIN #> The only problem is that this procedure should be repeated each time the apparatus.

6110

To reduce electricity consumption can disable EFR (Enhanced Full Rate) # 3370 #>

To activate EFR * 3370 #>

To reduce the rate of battery discharge, and enable HR (Half Rate) * 4720 #> then turn off and back on the phone.

To enable HR # 4720 #>

To view IMEI number * # 06 #>

Show software version * # 0000 #>

The entrance to the special menu * # 92702689 #> Commands in a special menu:

6232 OK indicates the month and year

7332 OK indicates the last modification date in the program

7832 OK indicates the date of purchase (if entered)

37832 OK you can enter the date of sale MMYY ('re careful then you can not change)

9268 OK indicates the serial number (IMEI)

7110

View the firmware version * # 0000 #>

View the IMEI * # 06 #>

Log into the service menu: * # 92702689 #> Consistently pressing down you'll see after the IMEI:

An IMEI (International Mobile Equipment Identification)

2 MM / YY (date)

3 Date of acquisition (here you can vvesi acquisition date, if your phone is new. Remember that the date is entered once, and if you were wrong date to fix it later it will be impossible!

4 Date of repairs (if repaired)

5 Date of transmission to the user? NOTE: To exit from this mode should be switched off and re-enable the device.

Check the support card mode SIM-clock-stop (only for firmware version 5.24 or later) * # 746025625 #>

Activate Enhanced Full Rate Codec (EFR): * 3370 #> will be activated after restarting the phone (consumes more power) Off Enhanced Full Rate Codec (EFR): # 3370 #> and EFR will be disabled when you restart the phone

Activate Half Rate Codec: (only available for firmware version 4.33 or earlier), enter * 4720 #> and Half Rate Mode will be enabled after restarting the phone Deactivate Half Rate Codec: enter Enable # 4720 #> and the Half Rate Codec will be deactivated after a reboot the phone.......

============================================

"""Samsung Mobile Phone Secret Codes"""

Samsung * # 9998 * 947 # (without SIM)

Standard Code - 1234 or 0000

reset eprom: * 2767 * 2878 # (removing code)

X100, X600 - remove simlock # * 7337 # lock list * # 7465625 #

* 2767 * 3855 # - FULL E2P RESET

* 2767 * 2878 # - CUSTOM E2P RESET

# * 7337 # - UNLOCK

* 2767 * 688 # - UNLOCK

* # 0523 # - CONTRAST

* # 9998 * 523 # - CONTRAST

* # 8999 * 8378 # - Service Menu (X100)

SGH-600

* # 06 # -> Show IMEI.

* # 9999 # -> Show Software Version.

* # 0837 # -> Show Software Version (instructions)

* # 0001 # -> Show Serial options

* # 9125 # -> Activates the smiley when charging.

* # 9998 * 228 # -> Battery status (capacity, voltage, temperature)

* # 9998 * 246 # -> Program status

* # 9998 * 289 # -> Change the frequency of calls

* # 9998 * 324 # -> Display Debugger

* # 9998 * 364 # -> Watchdog

* # 9998 * 377 # -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.

* # 9998 * 427 # -> Trace Watchdog

* # 9998 * 523 # -> Change the display contrast - Only for version G60RL01W

* # 9998 * 544 # -> Jig detect

* # 9998 * 636 # -> Memory status

* # 9998 * 746 # -> SIM File Size

* # 9998 * 778 # -> SIM Service Table

* # 9998 * 785 # -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error.

* # 9998 * 786 # -> Run, Last UP, Last DOWN

* # 9998 * 837 # -> Software version

* # 9998 * 842 # -> Test Vibrator - Flash the screen flashes for 10 seconds and vibration activated.

* # 9998 * 862 # -> Vocoder Reg - Normal, Earphone or carkit can be selected

* # 9998 * 872 # -> Diag

* # 9998 * 947 # -> Reset On Fatal Error

* # 9998 * 999 # -> Last / Chk

* # 9998 * 9266 # -> Yann debug screen (= Debug Screens?)

* # 9998 * 9999 # -> Software version

* 0001 * s * f * t # -> Changes serial parameters (s =?, F = 0,1, t = 0,1) (incomplete)

* 0002 *? # -> Unknown

* 0003 *? # -> Unknown

SP-unlock SGH-600 and SGH 2100

* 2767 * 3855 # -> Full reset l EEPROM (THIS CODE REMOVES SP-blokirovku!)

But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the corresponding software (at your own risk)

* 2767 * 2878 # -> reset user EEEPROM

This code was tested on Samsung SGH-600 with software version FLD_2C6 G60SB03X

SAMSUNG

a800 unlock - * 2767 * 637 #

Samsung

x100, x600 -

Unlock: # * 7337 #

Customer Reset: "* 2767 * 2878 #".

WAP Reset: "* 2767 * 927 #"

Full Reset: "* 2767 * 3855 #"

Samsung

* 2767 * 3855 # - FULL E2P RESET

* 2767 * 2878 # - CUSTOM E2P RESET

# * 7337 # - UNLOCK

* 2767 * 688 # - UNLOCK

* # 0523 # - CONTRAST

* # 9998 * 523 # - CONTRAST

* # 8999 * 8378 # - Service Menu (X100)

============================================

"""""Sony Ericsson Mobile Phone Secret Codes""

unlock Sony J5 / J6 / J70 / J70

and probably the old Z - series ...

* # 73287489263373738 #

> * <<* <* - Service menu

<* * <- Lock menu

CMD-Z1

* # 06 # displays IMEI (International Mobile Equipment Identity) code

The following code displays information about the software in the first line and detail. on the CPU and OS in the second and third row.

# 8377466 # (# version #)

In earlier versions of the above mentioned code does not work, but you can try the following:

In the OSM PHONE SETTINGS - FACTORY SETTINGS and click once. The display will show "Factory Setting Yes No". Do not do or anything more, leave this menu, for what it is.

Move the main switch the phone a bit to the right (a little means so that contact was interrupted, but not long enough to turn off the phone)

Now we collect

# * 04

On display will be information about the software.

this is for Sony Eriksson

works for the K500 and K700

============================================

                    "End My Site"